NFB-301C

This add-on accessory will enable customers with smartphones and tablets to control temperatures remotely, access usage data and receive diagnostic notifications on all Navien products (NPE, NPE-2, NPN-U, NPN-E, NCB-E, NCB-H, NFC, NFC-H, NFB, NFB-H, NFB-C and NHB).

NaviLink cable. Allows you to expand your NaviLink control to a maximum of 3 channels for monitoring 3 banks of 8 units. Requires NaviLink Control.

Designed to neutralize the condensate of up to: 16 units NPE, NCB, NFC, NFB and NHB); 11 units NFB-301C; 9 units NFB-399C

Replacement Media for Commercial Neutralizer.

Designed to neutralize the condensate of up to: 6 units NPE, NCB, NFC, NFB and NHB; 3 units NFB-301C; 2 units NFB-399C

Replacement Media for Light Commercial Neutralizer.

The outdoor sensor and wire is designed to allow outdoor reset functionality on the NCB-E, NCB-H, NFC, NFC-H, NHB, NFB and NFB-H series units.

Required to cascade and common vent NPE, NPE-2, NPN, NCB-E, NCB-H, NFC, NFC-H, NFB, NFB-H, NFB-C series and NHB-110 & NHB-150 models.

Zone pump controller designed to work with the NCB, NFC, NFB, NFB-C and NHB series allowing control from 2 to 6 zone pumps.

2 Zones

3 Zones

4 Zones

6 Zones

Designed to sense supply, return or tank temperature of your hydronic heating system. Works with NFC, NFC-H, NHB, NFB, NFB-H and NFB-C series boilers.

Wall flange designed to work on 2” intake and exhaust pipe for a clean installation look in location where the pipe goes through the wall.

Wall flange designed to work on 3” intake and exhaust pipe for a clean installation look in location where the pipe goes through the wall.

Converts proprietary equipment data to LonWork protocol. Includes gateway, power supply, connectors and set up instructions.

75 PSI

150 PSI

Ready-Link® Commercial Boiler Rack System Base. The free standing rack system is designed, with pipe support brackets, for infield assembly and approved for indoor installations. Designed to work with NFB-C series units.

Ready-Link® Commercial Boiler Rack System Add-on. The add-on rack is designed, with a pipe support bracket, to expand the base rack system allowing up to 16 units on a free standing rack system. Designed to work with NFB-C series units for infield assembly and approved for indoor installations

Converts proprietary equipment data to BACnet MS/TP, BACnet/IP and Modbus TCP building automation protocols. Built-in WI-FI capability allows connection without accessing facility’s LAN network. Includes gateway, power supply, connectors and set up instructions.

Required for cascade/common vent installations with NFB-C

Includes cascade cable (GXXX000546) and common vent collar damper.