Required for Cascade/common vent installations with NPE-2, NFC-H, NFB-H and NHB (NHB -110 & NHB-150 models) series units produced on or after September 15, 2016. Includes Cascade Cable (GXXX000546), VID jumper cable and common vent collar damper.
Designed for NPE-A. NPN-U and NPN-E series. HotButton™ kit allows manual operation of a recirculation pump (ComfortFlow™ on NPE-A). Includes an add-on PCB, 1 push button and wall plate.
"Extra push button for use with HotButton and extra wall plate.
Extra wall plate for use with HotButton and extra HotButton push buttons.
NaviCirc is a simple plumbing device that uses the existing hot and cold water lines to reduce the wait time for hot water at the faucet without the need for a dedicated recirculation return line.
NaviCirc Valve Kit includes the NaviCirc Valve (PFFW-SXX-001) and two 1/2" x 3/8" flexible hoses and adapters.
Highly recommended for protecting hydronic heating systems by capturing magnetite and iron oxides. Especially important in retrofit situations where older piping exists.
This add-on accessory will enable customers with smartphones and tablets to control temperatures remotely, access usage data and receive diagnostic notifications on all Navien products (NPE-A, NPE-S, NPN-U, NPN-E, NCB-E, NFC, NFB, NFB-C NHB). Additionally, recirculation activation can be scheduled for any hour of any day on the NPE-A...an industry first.
NaviLink cable. Allows you to expand your NaviLink control to a maximum of 3 channels for monitoring 3 banks of 8 units. Requires NaviLink Control. Works with NPE, NCB and NHB series units.
Designed to neutralize the condensate of up to: 6 units NPE, NCB, NFC, NFB and NHB; 3 units NFB-301C; 2 units NFB-399C
Replacement Media for Light Commercial Neutralizer.
Residential condensate neutralizer for NPE, NCB, NFC, NFB and NHB series units designed to neutralize the condensate of one unit.
Replacement Media for Residential Neutralizer.
The outdoor sensor and wire is designed to allow outdoor reset functionality on the NCB, NFC, NFB and NHB series units.
Anti-Scale system designed to treat hard water. Installs on the DHW cold inlet supply.
PeakFlowE™ Replacement Media Cartridge.
PeakFlow™ Replacement Media Cartridge.
3/4” lead free isolation valves with relief valve designed to work on NPE, NPN and NCB series units. Allows for easy and quick servicing of DHW systems.
1" isolation valves without relief valve designed to work on NHB and NCB series units. Allows for easy and quick servicing of hydronic space heating systems.
Required to cascade and common vent NPE, NPN, NCB, NFC, NFB, NFB-C series and NHB-110 & NHB-150 models.
Ready-Link® Rack (V3) Base. The free standing rack system is designed for infield assembly for indoor and outdoor installations. Designed to work with NPE, NPN, NCB, NFC, NHB and NFB series units. Base rack allows installation for up to 2 units back to back.
Ready-Link® Rack (V3) Add-on. The add-on rack is designed to expand the base rack system allowing up to 16 units back to back on a free standing rack system. Designed to work with NPE, NPN, NCB, NFC, NHB and NFB series units for infield assembly for indoor and outdoor installations.
Zone pump controller designed to work with the NCB, NFC, NFB, NFB-C and NHB series allowing control from 2 to 6 zone pumps.
Designed to sense supply, return or tank temperature of your hydronic heating system. Works with NFC, NFB, NFB-C and NHB series boilers.
Primary loop stainless steel manifold designed to work on NCB-H and NFC-H models for fast, clean installations. This package includes new stainless steel manifold, isolation valves with gaskets, PRV/air vent/LWCO adapter tree, air vent, threaded connection adapter with clip and LWCO plug.